Despite the cold, I have done some more work on the Cherry Entry Table. After cutting all the parts for the table base, I cut all the Kreg holes. Here is what that looks like.
Once all the Kreg holes were created, the pieces needed to be sanded. Then came the assembly of the base. I have not done a lot of work with Kreg assembly in a while, so I was a little rusty.
I finally got all the base pieces assembled using the “Fine” thread Kreg screws and their assembly tables. Here is the base for the table.
The next step is installing a shelf near the bottom of the legs just above the taper. After that, it is the top and applying a finish to the whole table.
Doug
